The Soft-Contact Method and Instruments for Measuring the Surface Temperature of Solids

A method and instruments based on it are proposed for the contact measurement of surface temperature when carrying out industrial experiments and when monitoring technological parameters.     

Design Methodology and Area Sensitivity Analysis of Horizontal Subsurface Flow Constructed Wetlands

An approach is presented to satisfy the demand for simple criteria, guidelines and models for the preliminary sizing of horizontal subsurface flow (SF) constructed wetland systems. This approach eliminates time-consuming calculations and iterations by providing graphical solutions for wetland system sizing. Therefore, it can be used for the preliminary assessment of new or performance evaluation of existing subsurface flow constructed wetland systems. The validity of this methodology is checked with data from existing systems and is found to be quite satisfactory. This methodology is combined with simple equations predicting the maximum wetland capacity in summer, so as to assist designers in sizing installations in tourist areas with increased summer populations. Furthermore, based on this methodology, a sensitivity analysis is performed of the area requirements for wastewaters of various strengths and various design conditions and performance criteria. The results provide a useful overview to engineers and further simplify the design methodology of new subsurface flow constructed wetland systems.     

不同表面预处理对有机电致发光显示器性能的影响

从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。     

LARGE EDDY SIMULATION OF VERTICAL JET IMPINGEMENT WITH A FREE SURFACE

1. INTRODUCTION When wastewater is discharged into rivers, lakes or oceans, it usually leads to the formulation of turbulent jet with a free surface. If the ambient water depth is shallow, the jet will impinge on the water surface and the confinement of f…     

多跨简支曲线轨道折线梁桥空间振动分析模型

提出了一种多跨简支曲线轨道折线梁桥的空间振动分析模型,采用20自由度的梁段单元,可方便考虑T型梁横向与竖向弯曲、自由扭转、约束扭转等变形,选取正交流动坐标,建立了曲线轨道折线梁桥的动力特性矩阵,特别适用于曲线轨道折线梁桥与列车的空间振动分析。在实例研究中,计算了提速列车通过32m曲线轨道折线梁桥时的空间振动响应,并检算该桥是否具有足够的刚度及良好的运营平稳性,可供有关部门参考。     

高温酸化助排剂HC2-1的研究

为了满足高温油藏和深井酸化作业残酸返排的需要，通过表面活性剂的筛选和复配研究，得到了高温酸化助排剂HC2—1。其性能评价结果表明，HC2—1具有使用浓度低、表面活性高的特点，在20％的HCI溶液中，当其浓度为50mg／L时，表面张力为20．7mN／m；具有良好的耐温性能，在180℃下恒温48h，HC2—1仍保持较高的表面活性；具有良好的耐盐能力，加有HC2—1的20％HCl溶液和CaCO3反应至HCl完全消耗，整个反应过程体系无新相生成且表面张力基本不变；可增大酸液体系的润湿角，进一步降低毛细管阻力，使酸液返排率由46％提高到97％，在促进酸液返排的同时与原油不发生乳化反应。     

红外焦平面阵列基于黑体的非均匀性校正方法中的限制因素

以基本的红外辐射理论为依据，阐述了红外焦平面阵列非均匀性校正的物理原理，首次综合性地论述了标定类方法所存在的三个基本限制因素，并重点给出了红外焦平面阵列响应漂移的实验结果。     

Fe3O4/PSt/TiO2多层包覆电磁响应微球的制备

首先采用分散聚合法将自制的Fe3O4磁流体和苯乙烯反应合成有磁核的Fe3O4/PSt磁性聚合物微球，然后，用非均匀成核水解反应在Fe3O4/PSt微球外包覆无定形二氧化钛，获得Fe3O4/PSt/TiO2复合微粒。用红外光谱、扫描电镜和热分析对粒子的形貌和结构进行了表征。并测试了微粒的介电性能和磁性，结果表明，所制得复合微粒有良好的电、磁响应性。     

A Revised Methodology for Research on Metamemory: Pre-judgment Recall And Monitoring (PRAM).

A revised methodology is described for research on metacognitive monitoring, especially judgments of learning (JOLs), to investigate psychological processing that previously has been only hypothetical and unobservable. During data collection a new stage of recall occurs just prior to the JOL, so that during data analysis the items can be partitioned into subcategories to measure the degree of JOL accuracy in ways that are more analytic than was previously possible. A weighted-average combinatorial rule allows the component measures of JOL accuracy to be combined into the usual overall measure of metacognitive accuracy. An example using the revised methodology offers a new explanation for the delayed-JOL effect, in which delayed JOLs are more accurate than immediate JOLs for predicting recall. (PsycINFO Database Record (c) 2010 APA, all rights reserved)